Industrial Air Knife Blower Systems

Process Air Solutions designs complete industrial air knife and nozzle systems for drying, blow-off, cooling and debris removal. Each air knife produces a high-velocity, uninterrupted air curtain, with exit velocities from 10,000 to over 45,000 feet per minute and air knife efficiencies above 95%. Paired with a Vortron centrifugal blower, an air knife drying system replaces low-velocity or compressed air blow-off with a more efficient setup. Stainless steel and aluminum models are available in lengths up to 154 inches.

Air Knife Features

Superior air-flow capacity with efficiencies exceeding 95%.
Optimum aerodynamic design with extended edge (Coanda effect) to achieve high velocity and laminar flow.
Exit velocities from 10,000 to 45,000 ft/min.
Reduces energy consumption by improving overall system efficiency.

Air Knife Dimensional Data

Gap Size: Standard air knife gaps: 0.035", 0.045" - Custom sizes from 0.020" to 0.070" are possible.

Finish: Both stainless steel and aluminum air knives are polished.

Air Knife Inlet Length: Standard length is 8" - Optional lengths up to 18".

Dimensions
Model
Inlet OD	1.5"	2.0"	2.0"	3.0"
Manifold OD	2.5"	3.0"	3.5"	5.5"
Height	3.5"	5.75"	6.0"	10.0"
Length	Up to 30"	Up to 60"	Up to 60"	Up to 154"
Material	Stainless Steel	Aluminum	Stainless Steel	Stainless Steel
Air-Knife Measurements: This illustration the manifold OD and height measurements for an aluminum extruded air knife. For the diamond air knife models, the manifold OD is the upper-right side (as shown above); the height is the lower-right side. The Micro-Body air knife manifold OD is the top of the triangle, and the height is measured along the right side, or the extended edge of the air knife. For all air knife models, the length is considered to be the effective length, not including the inlets.

Available Inlet Orientations
Right Hand	Vertical Middle	90° Option
Left Hand	Dual, Vertical Middle	45° Option
Dual	Dual, Vertical Middle	Dual, Dual Vertical