The flagship of Vortron’s AirPower series. Where flows of 600-1600 SCFM at pressures at or above 70 in-H₂O are required, the Z40e surpasses all others! This model exhibits an extraordinarily flat flow/pressure characteristic that is notably absent of the typical "drooping" curve. In some cases, this enables a single Z40e to do the work of multiple units. 80% peak efficiency is attained. Ideal for ultra high-performance air knives, high volume blow-off, and de-watering applications typical with canning, beverage, and electronic industries. Also, air evacuation, aeration, large fluidized beds; air or non-corrosive process gas.

Vortron’s most compact AirPower model. The J70 specializes in the lower flow, but higher pressure applications, without need for excessive impeller speeds. Still, the J70 attains a peak efficiency of 75%! Ideal for high-performance air knives, blow-off, or de-watering systems where high production throughput is required, but manufactured articles are smaller in scale. Also ideal for medium-sized fluidized beds or where large pressure drop/long piping runs exist. Use with air or non-corrosive process gas.

Vortron’s high efficiency AirPower model for intermediate flow applications at moderate pressures where the ultimate in energy efficiency is desired. At 79% peak efficiency, the X40 outclasses all others by a wide margin! The best choice where high duty or extended "on time" impresses the need for energy conservation. Applications include high-performance air knives, blow-off, or de-watering nozzles used in compact, high throughput process cleaners; air evacuation, aeration, fluidized beds; air or non-corrosive process gas.